How to unlock samsung Monte S5620 with z3x without flashing CSC and CODE

1-Open z3x  2g tool and choose S5620 

2-Remove battery

3-Connect the "microUART" cable (C3300k)

4-Press "read info(codes)"

5-Wait until program starts to read than press and hold power button and put back the battery.


If works ,say thank you Ninja!

Flash Motorola MB860 Atrix AT&T SBF firmware

Download RSD lite:
http://www.4shared.com/file/h691HK6E/RSDLite56.html?

AT&T sbf Firmware :

http://www.4shared.com/file/mxUxxi0n/1FF-olympus-user-234-4591-1106.html?

Turn on the phone ,install the drivers ,open RSD program , select the AT&t sbf file , connect the phone and the program will show that the phone is connected ,now press start .


If works ,say thank you Ninja!

How to master reset Nokia Lumia 920

    

With the phone turned off,press POWER key to turn on

 the phone ,then IMMEDIATELY press VOLUME DOWN

 key

An "!" mark will appear on the display.

Press the following keys in this order:

1-VOLUME UP

2-VOLUME DOWN

3-POWER

4-VOLUME DOWN

Device will show an engine gear and will reset

If works ,say thank you Ninja!

Change Motorola Motosmart mix XT 550 from chinese to spanish (sbf file)

Download RSD lite:
http://www.4shared.com/file/h691HK6E/RSDLite56.html?

Sbf file:
http://www.4shared.com/archive/9CkcuZD9/argons_4_071b16rps_flex_latam_.html?


Put the phone in bootloader mode,vol.down +play+power and connect the usb cable let the computer read your phone ,if the computer don't recgonize make sure you have installed the drivers ,you can download here:
https://motorola-global-es-latam.custhelp.com/app/answers/detail/a_id/89882/p/30,6720,8490/

Open RSD lite and on the "filename" choose the SBF file you've downloaded ,when you see on the program port n 1 connected press start and wait until is done.



If works ,say thank you Ninja!

How to unlock samsung Keystone2 GT- E1205L with Z3X box

1-Remove sim card and battery

2-Open Z3X program (samsung 2g tool)

3-On the phone model you will choose E1200T

4-Connect the cable J750 (make sure it is pluged in correct or not going to work)

5-Press direct unlock and only now you will press hold the POWER BUTTON  AND PUT BACK  THE BATTERY .

6-Wait until finish ,the program will say UNLOCK FAIL ,not a problem, remove the cable ,put back the sim card and turn it on, you will see that the phone its unlocked ,if  continues locked try again ,It works I just unlocked 400 pieces today.







If works ,say thank you Ninja!

UNROOT Galaxy Nexus I515 for VERIZON only!!

This tutorial is for factory resetting Samsung Galaxy Nexus before 

going forward with root and other subsequent awesomeness.

In this tutorial you will get full factory restore ODIN with radios 

(both LTE and CDMA), kernel and recovery. This will bring you 

back to the current unrooted 4.0.2 release of Android for the 

Galaxy Nexus.

Before going further please note

Flashing this will wipe ALL userdata and your sdcard partition! 

Make a backup and copy it off of your phone.

It will bring your device back to stock running Android 4.0.2 Build 

ICL53F with EK05 CDMA and EK02 LTE radios.

It will not relock the boot loader. You must relock your bootloader 

after flashing this ODIN to be 100% factory.

Files to download:

Odin

http://www.4shared.com/rar/P4AtukJT/Odin3_v13.html?

Verizon

http://www.4shared.com/archive/nMsVZhAf/VzW-SCHi515-FactoryODIN-ICL53F.html?

Instructions:

Step 1 This assumes that you already have the Samsung driver installed, the phone is unplugged from the computer and turned off.

Step 2 Download the Verizon file and Odin3.

Step 3 Open Odin3

Step 4 Connect the phone to the computer

Step 5 Enter download mode (hold the vol down key and press power). Odin3 should now see the phone.

Step 6 In Odin3 click ‘PDA’ and select the PDA ODIN file from the archive

Step 7 In Odin3 click ‘PHONE’ and select the PHONE ODIN file from the archive

Step 8 Click Start. After it is completed the phone will reboot. The Odin3 screen should look following

If works ,say thank you Ninja!

Blackberry Playbook (Power troubleshooting)

If you put your Playbook to charge and you see the red light on but nothing comes up on the screen,I do this troubleshooting and works 100% if your problem is not LCD or battery.

1-Download Blackberry "Desktop manager" , you can find on www.blackberry.com.

2-Connect your the Playbook on your computer and open the Blackberry "desktop manager".

3-Now press together the buttons : POWER+VOL. UP +VOL. DOWN and the program will recognize the  tablet.

4-Follow the instructions to repair or upgrade the software ,once  the installation is complete you can remove the cable and put to charge or you wait until it gets charged by the computer and restore your informations, this will take a couple hours deppending on how many charge you have left on the tablet.
If you connected to the charger and you see a green light flash on top ,that means everything is fine , just wait to charge.






If works ,say thank you Ninja!

Hard reset Samsung S3 MINI I8190

I don't know why, but some S3 Mini will not reset pressing the buttons combinations,here is another solution to master clear your S3 mini
1-Download and extract this WIPE program on your desktop:

http://www.4shared.com/rar/dYtPYBSf/WIPE_I8190tar.html?

2-Download Odin :

http://www.4shared.com/rar/KA2UoSTm/I9300_Odin3_v304.html?

3-Make sure you have the drivers installed for your S3 mini

4-Open Odin and select PDA and browse the WIPE program

5-Now put your phone in download mode: Turn off your phone ,press volume down + center button + power ,you will see a yellow triangle ,now you press volume up and connect the usb cable and press start.


If works ,say thank you Ninja!